Our Blogs

How to Make Chenille Patches?

If you are into letterman jackets, you would know about the chenille embroidery patch and how it offers the 3D effect with bright hues and colors. It is usually stitched on the felt, which can be contoured on the garment. On the other hand, some people want to make their own chenille embroidery designs for the jackets, and they wonder, “how to make chenille patches?” Well, there is nothing to be worried about because we have the details for you!

Steps For How To Make Chenille Patches

Drafting The Pattern

When you are looking for answers on how to make chenille patches, the first thing you need to do is to measure the length and width of the jacket where the chenille patch will go and make sure it’s within the parameters of the machine. Then, trace the pattern’s outline and always use the ruler to ensure measurements are precise. It is better to use chenille fabric for the top layer and cut out the patterns (you can also use the chalk for outlining the stitch).

While selecting the thread colors, choose the color the top layer, and the second color should be to the outer layer. Then, cut out the top layer of the fabric and make sure you don’t cut out the bottom layer. This is because you will need cloth with the outer layer for adding cloth to the hoop attachment (remember, you will need to make embroidery).

Creating The Patch

On the top letter, coat the temporary adhesive and apply it to the bottom layer (we suggest using the sticky stabilizer sheet that aligns with the weight of the fabric). Then, hoop the bottom fabric on the hoop attachment (the fabric must be taut) and make sure the top layer is in the middle to ensure nothing shifts during embroidery).

Now, embroider the top layer with the desired stitch; it’s better to go with a tight stitch, and once done, cut out the loose threads. Then, start embroidering the outer layer and use a tight stitch. You can use the rotary cutter for cutting the patch and make sure you don’t accidentally cut the embroidery threads. Further, cut the fusible tracing.

Once done, remove the protective sheet from one side (the fusible is double-sided). Then, use the iron to paste the patch on the fabric. Keep in mind that you need a high setting with cotton fabric. Once you have ironed it, remove the second sheet and put it on the jacket. Put the Teflon sheet on the top to save the thread from iron’s heat. Also, don’t forget to add pressure through iron because it’s essential for adhering the patch to the jacket!

We hope your query for how to make chenille patches is resolved now!!